How to Install Wall To Wall Carpeting
1.Split carpet: put carpet in a big place,measure and cut the size
2.Clean floor: Make sure there is no water,oil or dust
3.Lay the carpet : Glue floor and lay carpet ,If there is ceramic or cement floor need to use glue,spray glue and then lay carpet .(make sure to use carpet installation glue)
4.Carpet joint : Use Carpet ironing tape joint the carpet , after ironing, the melt glue on tape will joint carpet pieces well ,Make sure each piece is well jointed and there is no seam and wrink
Step5. Sketch the carpet :Lay carpet and use a sketcher to sketch the carpet,then press the carpet to the wall seam
5. Sketch the carpet :Lay carpet and use a sketcher to sketch the carpet,then press the carpet to the wall seam
6. Cut off excess and High the edge into the wall seam,Check everything is ok then clean the carpet with vacuum cleaner.
（Please make sure to leave a 2-3cm installation allowance for the each edges
Shopping List for How to Install Wall-to-Wall Carpeting:
– carpet tack strips
– carpet padding
– carpeting
– carpet padding adhesive
– latex seam sealer
– carpet sealing tape
– duct tape, used to seal seams in carpet padding
Tools for How to Install Wall-to-Wall Carpeting:
– hammer
– carpet knife
– cushion back cutter, used to trim carpeting for seaming
– knee kicker, used to help attach carpet edges to tack strips
– stair chisel, used for final fitting of carpet along walls
– double-blade wall trimmer, used to trim carpet at walls
– power stretcher, used for stretching carpet tight across floor
Youtu.be:https://youtu.be/68Yks6UiiDw
Facebook:https://www.facebook.com/profile.php?id=100076644884545
Instagram:https://instagram.com/nancywang795?igshid=MjEwN2IyYWYwYw==
LinkedIn:https://www.linkedin.com/feed/
